Laycock Crown Systems - Balancing compounds

HOME

BALANCING COMPOUNDS

 

EPO DYNAWEIGHT

 


EPO DYNAWEIGHT
EPO Dynaweight is a two-part epoxy putty.
Thoroughly mix equal parts (by volume, not by weight) of Part A and Part B until mass is of uniform color. Apply to point of imbalance as you would a trial balance. Spin object on balancer. Move, add or subtract EPO Dynaweight as necessary to obtain final balance. Your balancing operation is now complete.
EPO Dynaweight can be heat cured at 250 degrees F (oven or heat gun) in 15 minutes or air cured at 72 degrees F in 12 hours. No change occurs during cure, except hardening. Pot life of mixed EPO Dynaweight is approximately 2 to 2.5 hours at 72 degrees F. Shelf life of separate components is approximately one year from date of manufacture when stored in tightly closed containers at room temperature. Clean up can be accomplished simply with a suitable industrial hand cleaner followed by soap and water. EPO Dynaweight withstands temperatures from -80 to 500 degrees F constant and will withstand periodic temperatures to 750degrees F.
Area to which EPO Dynaweight is to be applied should be free of grease, oil and any other contaminants prior to placement of material.

 

Product
Kit Size
Unit/Case
Price USD
Packing & Handling
Weight
Domestic
Export
EPO DYNAWEIGHT
2 lb. Kit
12
$8.25/lb
$10
-
- Lbs
15 lb. Kit
2
$7.95/lb
$10
-
- Lbs
60 lb. Kit
1
$7.70/lb
$10
-
- Lbs
150 lb. Kit
1
$7.70/lb
$10
-
- Lbs

 

 

 


 

QUESTIONS OR COMMENTS?    EMAIL US AT laysys@verizon.net

E-mail your Purchase Orders
to laysys@verizon.net or
Fax    813-242-0514